UkrElektroRemont Plant, LLC

General Director - Zenchenko Alexey
Commercial Director - Alexander Serduk

UkrElektroRemont Plant was founded on the 20th of may 1940.

Sphere of activity:
- maintenance and modernization of power transformers with power up to10 megawatt and voltage up to 35 kilovolt;
- maintenance of induction motors of industrial and crane performance for voltage up to 1000 volt with pouring and rigid windings;
- maintenance and modernization induction and synchronous motors, synchronous compressor, turbo-generators and hydrotreaters for voltage up to 13,5 kilovolt with micatape compounded and thermosetting insulation with thermal-life characteristics "B" and "F";
- manufacture and delivery of spare windings (coils, semicoils, rods) with micatape compounded and thermosetting insulation with thermal-life characteristics "B" and "F" for repair and modernization of electric machines for voltage up to 13,5 kilovolt.

Manufacture of stator windings for electric machine repair is supplied with the following equipment:
1. The group of insulation and magnet machines for winding of semimanufactured articles with simultaneous wind isolation and semiautomatic device for stator coil SRK-2 extension. Imposition of frame insulation is performed according to the modern technology on the tape insulating machines, which are equipped with the device for tape heating with the following thermal treatment by hydrostatic molding.

2. Semi-automatic devices for imposition of frame insulation on the stator coil and rods of stator windings of turbogenerators with voltage from 3 to 13,5 kilovolt. Molding of the frame insulation performs according to the progressive technology on break-in machines, which are equipped with the device for break-in device heating with the following molding on the hydraulic press and thermal treatment using thermocontractable tapes.

3. The machine for processing of cartridge thermosetting insulation type "Monoterm" ("Slyudoterm").

4. Hydraulic press for simultaneous molding and baking of frame insulation of high-voltage stator coils.

5. Dipping-and-drying unit, meant for vacuumization, dipping and hydrostatic molding of high-voltage units and rod windings of large electrical machines stators according to thermal-life characteristics "B" and "F".